Dedicated Micros NetVu Console Guide d'installation télécharger pdf (Page 164)

Appendix D - IP Address via Serial

For guidance on locating the unit’s IP address via a serial port connection, please see below:

Locating the unit IP address using the serial port

1. With the mains power off, connect a standard 9DF-9DF RS232 communications cable from

the PC to one of the serial port connections on the rear of the unit.

2. On the PC, click Start->Programs->Accessories->Communications->Hyperterminal and

create a new connection via the COM port using these settings.

Bits per second 115200

Data Bits 8

Parity None

Stop bits 1

Flow Control None

3. Power the unit, the Power LED on the unit will illuminate.

4. Hyperterminal will display the communications information as the unit boots up. This will

include the IP address, Subnet and Gateway.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 170 171 172

Pas de commentaire

Dedicated Micros NetVu Console Guide d'installation Page 164