Dedicated Micros Eco4 Instructions d'exploitation télécharger pdf (Page 12)

Eco4

Installing the Eco4 Unit

Step 1 - Connecting Video

VID 1

USB 1

NET

MON

VID 4

VID 2

VID 3

12V DC

AUD

OUT

ALARMS / RELAYS

VGA

COM1

USB 2

The unit supports up to 4 connected Video Inputs (dependant on model) via the 75Ω BNC

connectors. Connect cameras to the video inputs, starting from input 1.

5.12

Step 2 - Monitor

The unit supports a main monitor via ‘Mon’.

A monitor can also be connected via the VGA connector.

IMPORTANT NOTE

On initial boot, the unit will utilise the composite output (MON A) and display a request for conrmation that

the message can be seen. If no conrmation is received after 30 seconds, the unit will REBOOT and display a

similar message via the VGA output. If this message is not conrmed within 30 seconds, the unit will REBOOT

again and continue this cycle until a conrmation is received.

Intelligent Security & Fire Ltd

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 139 140

Pas de commentaire

Dedicated Micros Eco4 Instructions d'exploitation Page 12